motorhome service flap for water and pump control
thingiverse
Motorhome water service flap for outdoor use. The entire unit must be printed with a weather-resistant and UV-stable filament. Inside, a Garden Hose Quick Connect is installed to connect a water hose. A matching O-ring sealing ring is required to ensure proper sealing. In addition, a 28mm x 13mm switch is necessary for installation. Two flat plug sockets are also needed to operate a pump or other device. The lock from AliExpress was used for this design. The shaft of the lock requires a mounting depth of 20mm. Silicone glue should be used to secure the connection tube on the backside. The housing has an installation size of 100mm x 100mm. A 4mm thick screw or rod is required to connect the cover to the housing. Countersunk screws that are not too wide but long enough will be needed to fix the cover to the motorhome. It's recommended to mount everything with silicone glue for added durability.
With this file you will be able to print motorhome service flap for water and pump control with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on motorhome service flap for water and pump control.