Motorcycle Bar End

prusaprinters

<p>I lost one of my Bar Ends so I designed a replacement. You will need to print two of each parts and you will need 2x M6 x 50 Capscrews and 2x M6 Nuts.</p> <p>This is designed to fit a 13mm ID Handlebar. I'm busy prototyping the expanding sleeve and will post this as soon as I've got a descent model. Photos of the print and fitted pics to follow.</p> <p>Print this pretty solid as it will have to be able to take some punishment if you put the bike down. I'm printing at 70% infill, 0.2mm Resolution.</p> <p>UPDATE: 15/07/2017 - I've added the Expansion Part of the Bar End. Please let me know if this works for you or if you've got a better idea. The M6 Nut fits into the expander.The capscrew plug is 0.5mm oversize, so it may need some motivation to go in :) I've also added an expander with M6 thread. It's easier to print, and you don't need a nut :)</p> <p>To get the thread correct I had to scale it to 125% on the DaVinci where on my UM2 Clone, it printed fine at 100%.</p> <p>UPDATE: 16/07/2017 - I've created a version that you can quickly fit using a mallet. I'll use these until my expander design is finished and tested.</p> Category: Automotive