Motorcycle / ATV Goggle Air

thingiverse

My system lets you wear your mask without covering your face. Air flowing behind the mask stops fog from forming. It dries sweat too. Say goodbye to putting on glasses before taking off the helmet only for them to be all steamy at your wrist. Use a good double-sided tape to fix it. If the position is bad, you can remove the tape with a blade. Also, boil the adhesive to make it flexible and mold it into the perfect shape of your helmet. Contact me if you have problems, I'll redo it! My system worked flawlessly while hiking 130 kilometers on a quad with temperatures at -2 in the morning and +15 degrees during the afternoon. Printer Settings Printer Brand: RepRap Printer: Prusa I3 Rework Perso Rafts: Yes Supports: No Resolution: 0.2mm Infill: 10% Honeycomb Notes: 10 mm of raft is a good size. I used a 0.4mm nozzle, but a smaller one can work too. With PLA, the nozzle temperature was 200°C and the bed temperature was 55°C. Post-Printing Requirements You need high-quality double-sided adhesive and around 5.5mm screw with a 4mm diameter bolt. The bolt goes inside the top part.