Motor mount for 3DLabprint Slingblade and Racestar 4108
thingiverse
Here's my design of a motor mount for the 3Dlabprint Slingblade. With this motor mount, you can install a Racestar 4108 in your Slingblade. The propeller size is 9x6 inches, and I recommend using a 6S / 1300 mAH LiPo battery with a 40 Amp ESC. It's going to be very hot, so make sure you're prepared. There are two versions of this part: one for new builds and another for retrofitting on the original motor mount. To print this part, I recommend using at least two perimeters, 100% infill, a layer height of 0.2mm, and support materials. The engine is bolted from the inside, so make sure to install the screw holes horizontally so you can tighten them securely from within. Now it's your turn to have fun with it!
With this file you will be able to print Motor mount for 3DLabprint Slingblade and Racestar 4108 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Motor mount for 3DLabprint Slingblade and Racestar 4108.