MOTO G POWER USB-C RETAINING CLIP

thingiverse

The USB-C cable on my Moto G Power would constantly fall out. I designed this clip to keep it held in place. I've been using this clip for about one year and it has worked well for me. This may work for other Moto G phones, but I don't have details on that. My Moto G Power dimensions are: 159.8 mm x 75.9 mm x 9.6 mm (as I measure it). Two versions are included. MTG-002 and MTG-003. MTG-003 is 1.3 mm longer in the "neck" which allows for a slightly longer USB-C body. The longer one (MTG-003) should work for shorter USB-C body cables also. MTG-002 is shown in the photos. One of the photos shows a wire tie attached to the cable. That is not required, but is an option if you really want to make sure the cable stays connected to the clip. USE: (1) Insert phone into 3D printed clip (2) Insert USB-C cable into phone (3) Press the cable into the clip (this "sets" the position of the USB-C cable) (4) Add a wire tie (optional) (5) Remove the phone by pushing the top of the phone clip away from the top of the phone (it basically pivots on the USB-C) Here is the etguuds brand cable shown in the photos: https://www.amazon.com/dp/B08933T2RX?ref=ppx_yo2_dt_b_product_details&th=1 Enjoy!