Moto G Power 2022 Phone Case TPU

thingiverse

I started with https://www.thingiverse.com/thing:4845832 by SteveCoast as a reference, Then made a bunch of tweaks and changes to accommodate the 2022 model. I made some adjustments for the punch outs on the back after my print, so it should be a little nicer than what I have pictured. The M on the back is the fingerprint sensor. The sim slot is open, the mic holes are open, the speakers and charging port are clear. The headphone jack has enough clearance to fit headphones. Having the volume and power open makes it very easy to tell what orientation you're holding it in. I printed in TPU at 220C, bed 60C, I used a raft because my first layer wouldn't stick without it on the Creality Ender Pro 3. I did use supports, and peeled them out afterward. You can't use PLA unless you want to cut the case in half to get the phone into it (I did as a test print). You could break it apart and add dovetails to print it in two parts if you really wanted to. The blend file is attached because I cleaned up the geometry and used booleans to punch the holes. This should make it easier to modify for other phones.