mostly printed touch plate, Tastplatte, XYZ-Probe

thingiverse

nothing special but I had designed my own 3d model thats more print friendly. I don't want to cut or buy a touch plate from the market. To get it to work I had coated it with aluminium foil or kitchen foil with a simple glue see picture. Use a straight ground to press the plate on the foil. Don't touch the foil and lay it on the table and press always the plate on the foil!!! glue the plate not the foil. It works perfect!!! 1. ensure your prints are accurate (I used an Anycubic i3 mega) measure with a 90 degree precision steel (Haarwinkel) 2. use a very fine sand paper to make a finish and clean it (only to remove burr or flash) 3. make a coating like you want but ensure electrical connection 4. there is a hole for a M3 screw 5. finish your wiring and ensure connection to Estlcam 6. Use a digital caliper or other suitable measurement tool and measure the accurate dimension and type in Estlcam printing it with a high infill more than 50% to get more weight