Mosquito hot end mount for Tenlog/Hictop printers

thingiverse

I had a couple lying around and wanted to get away from the teflon feed as it kept melting even when just printing PLA. I think the heat sink had poor contact with the filament tube and it was overheating at the bottom of the teflon tube. Also, wanted to print some higher temp stuff (with CF, open printer). Either way, this worked nicely to mount a mosquito, built in fan keeps the filament cool. I replace both to keep the tips equal height.Requires a 4mm OD, +/- 2mm ID teflon tube for the feed to the top of the mosquito. I designed this to mount the mosquito with M3 20mm screws, which requires drilling out the mosquito mount corners from the M2.5 threaded holes they are currently.