Montana Spray Paint Cover Cap

thingiverse

A simple protective cap for Montana Cans to prevent accidental activation of the nozzle (as such covers are no longer included in the scope of delivery).Notes on model:Diameter of the can lip: 63.2mm (must be overcome when clipping on)Fit type: Will require quite a bit of force to mount and remove. Cap can freely rotate on the can.Required print volume: 66mm (outer diameter) x 45mm (height)Notes on printing:PETG (or at least PLA+) is highly recommended as it is more flexible and less brittle than PLA.Good layer bonding is essential, as high tensile and shear forces act on the cap during mounting and removal. Therefore, an extrusion multiplier / flow rate of 103-105% and a print speed of no more than 50mm/s is recommended. (You can also reduce part cooling or increase the print temperature.)No additional steps are required to ensure build plate adhesion, however, for the obligatory fit test I recommend a brim.