Monster Energy Drink Koozie - Vase/Spiral Print - V2

prusaprinters

<p>A can Koozie for a 500ml Monster Energy(or same sized cans). A full can should slide in with a slight push and stay in there pretty securely until empty. This is much stronger than my previous version: <a href="https://www.thingiverse.com/thing:3254223">https://www.thingiverse.com/thing:3254223</a></p> <p>For fun I printed this in a temperature reactive PLA from Formfutura(they add a thermochromic pigment to it). When cool it's dark grey, when slightly warm it turns to a natural PLA colour(creamy white, slightly translucent). When holding the koozie for a little while you'll have a handprint on it that fades away when you put it down for a minute or two.</p> <p>There's an STL for PLA/PETG and ABS prints(different sizes due to ABS shrinkage).</p> <p>If printing the lid, print it with the Monster logo facing up and enable supports. It prints better this way and the logo is cleaner.</p> <p>Koozie is best printed with a large nozzle in vase/spiral mode. Lid is best printed with a normal nozzle in standard mode.<br/> I used a 1mm nozzle and 0.72mm layer height for the can(45-55 min print) and a 0.4mm nozzle with a 0.2mm layer height for the lid(30 min print)</p> <p>The Monster lid is a modified version of this: <a href="https://www.thingiverse.com/thing:22999">https://www.thingiverse.com/thing:22999</a></p> <h3>Print instructions</h3><h3>Print Settings</h3> <p><strong>Printer:</strong> Ultimaker 2+ Extended</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.72mm and 0.2mm</p>