Monoprice Select Mini v2 (MPSMv2) 40MM Fan and 5015 Blower Part Cooler Adapter

thingiverse

I noticed that there wasn't any MPSMv2 40MM fan adapters and 5015 part blower adapters already on the MPSM Wiki, so I decided to design my own and share it with the community. Some benefits of this design include: - Improved print quality: bridging seems easier over longer distances, and fewer supports are necessary as cooling output is higher. - No heat creep on the e3dv6 (clone) included with the MPSMv2 in my testing. - Quiet! I used a 40x20 MM Noctua fan. I tested this design for about three weeks on my own, refining it around six times before arriving at this final product. I used supports, but you may not need to, for the 5015 blower arm support. Print this "face down" as in place the 40MM fan adapter against the build plate with the distributor ring in the air. To complete this build, you'll need some fasteners to attach the 40MM fan and the 5015 fan to the mount. This also uses the existing clips, but I'll say it's NOT easy to affix the right slide clip. You will need some needle nose pliers for sure. Once it's on, you shouldn't need to take it off often. I used the following parts: 40MM heatsink fan https://www.amazon.com/Noctua-NF-A4x20-PWM-Premium-Quality-Quiet/dp/B071W93333/ref=sr_1_3?keywords=40mm+noctua+fan+pwm&qid=1562390553&s=electronics&sr=1-3 Blower Fan: https://www.amazon.com/SoundOriginal-Humidifier-Aromatherapy-Appliances-Replacement/dp/B071WMHNG5/ref=pd_ybh_a_42?_encoding=UTF8&psc=1&refRID=M8P18KC1G0730JK65KBG I connected the 40MM fan directly to the 12v rail off of the power supply of the MPSMv2, so it always runs with power on. I connected the 5015 blower to the PWM output of the existing part fan output on the motherboard.