Monoprice Select Mini Delta Cable Keeper

prusaprinters

<p>After disconnecting the cable bundle and moving the ptfe tube, the cable bundle/ptfe tube would get pinched between the control arm and the frame during a homing sequence causing the motor to grind and skip.</p> <p>I made this to keep the bundle from getting below the frame and getting pinched.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>DAGOMA</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Neva</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>.02 mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>17%</p></div> <p><strong>Notes:</strong></p> <p>Uses the existing frame screw to mount. Make sure you get a good bite with the screw or the model will pop off when there's a little pressure applied. A slightly longer screw wouldn't hurt, but I was able to mount it with the stock screw.</p> </p></p></p> Category: 3D Printer Accessories