Monoprice Select Mini - Bed Attached Camera Mount For Time-Lapse!

thingiverse

To learn more about this project and our other prints, please visit DIY3DTech.com. Also, be sure to check out our YouTube Channel at youtube.diy3dtech.com to learn more about 3D printing, CNC machining, and CO2 laser cutting & engraving. If you're looking for maker swag, head over to Swag.DIY3Dtech.com for one-of-a-kind gear. To find out how we designed, printed, and installed this bed-mounted camera adapter plate for the Monoprice Select Mini, check out our video here: https://youtu.be/BvNYB0FQgws. This camera adapter was designed in Open-SCAD, a free software used to create 3D models. The bolt holes were aligned with my unit and assumed to be uniform between machines, as I only have one printer. The holes are slightly oversized to accommodate variances in printing and make assembly easier. To assemble the plate, you'll need four M3 bolts that are 20mm long, replacing the existing shorter bolts, along with four M3 flat washers and four lock washers. If the holes are off or undersized for your printer, simply use a drill to ream them out larger as needed. I've also included the Open-SCAD source code here (http://openscad.diy3dtech.com/open-scad-designing-and-3d-printing-a-bed-mounted-camera-adapter-for-the-monoprice-select-mini/ ) so you can modify it if you wish. Print Settings: Printer: Any 200mm x 200mm printer will work. Rafts: No rafts are needed. Supports: No supports are required. Resolution: Print at a resolution of 0.3 mm. Infill: Use an infill of 25% to ensure structural integrity. Notes: Simply flip the plate over and print, then you're good to go! Don't forget to like and follow us on Thingiverse, and for more information on Open-SCAD, check out our site DIY3Dtech.com.