Monitor wallmount using 2020 extrusions

thingiverse

# VESA Wall Mount Using Spare 2020 Extrusions ## Printing ### Print a Single Unit - 100x100-on-20x20.stl (VESA mount for the monitor) - 20x20-wallmount.stl (Mount 2020 extrusion to your wall) ### Print Four of Each Part - 20x20-arm-attachment-long.stl - 20x20-arm-bracket-long.stl - 20x20-endcamp.stl - M8-nut-knob.stl ## Hardware Requirements - 3 x 2020 Extrusions (the shortest should be about 120mm) - 4 x M8 Bolts - 4 x M8 Nuts - 4 x M4 Screws (for the monitor) - 4 x Wall Mount Screws (use whatever works with your walls) - 36 x Extrusion Nuts - 36 x Screws that fit your extrusion nuts (M4 screws used) ## Assembly Instructions Screw the VESA mount to your monitor and the wall mount to your wall. Add extrusions to both mounts. Attach two 20x20-arm-attachment-long pieces to each side of another extrusion. Bolt them down. Use 20x20-arm-bracket-long to attach the third extrusion to both, the wall and monitor mount. Screw M8-nut-knob onto the ends of the bolts. ## Usage Tips You may need to re-tighten nuts from time to time. Depending on your monitor, you can also use shorter versions like 20x20-arm-bracket-short or 20x20-arm-attachment-short for more stability.