Monitor Case For 10'' Netbook Screen (N101L6-L0D)

prusaprinters

<p>This is a portable monitor made out of a screen from a broken netbook and a driver board I bought from eBay a few years ago.</p> <h3>Print instructions</h3><p>The model of the netbook screen I used was N101L6-L0D and the particular driver board that I used can be found <a href="https://www.ebay.com/itm/152439000722">here</a>. However, the monitor case was designed on FreeCAD and I also share the source fcstd file, so you can easily modify my design to fit your particular screen and driver board.</p> <p>Because the width of the case is exactly 250mm a properly leveled bed and an excellent build plate adhesion is absolutely essential, otherwise you may end up with warping at the corners of the print.</p> <p>I suggest printing this in PETG rather than PLA because depending the screen and the driver board you have the inside of the case could potentially get quite warm.</p> <p>The two pieces of the case fit together using M5 bolts without the use of any nuts. I also used a thread screw tap for creating the threads in the holes but that's probably not that necessary. You will also need 8 M2 bolts and nuts for mounting the screen and button board, as well as 4 M3 bolts and nuts for the driver board.</p>