Mold for mosquito hotend sock with Voron logo

prusaprinters

<p>https://www.thingiverse.com/thing:4879638</p><p>Hotend sock for the mosquito hotend, nice snug fit for making sure it won't fall off.<br>Sock goes all around the heaterblock and is suitable for using the magnum heatbreak.<br>The sock also slots into the 2 blind bottom holes next to the nozzle, securing it into place on that side.</p><p>Very proud of this design, i adapted a few design features from other sock molds i've used in the past and got this one right the first time. Haven't got a single bad cast out of it.<br>Super simpel to print 3 part mold that only uses 4 M3x16 screws.<br>Middle screw is for extracting the core along with the top mold, so leave the middle screw when taking the mold apart.<br>I do use a knife to take the mold apart since it takes quite some force.</p><p>Comes with the Voron logo on it, had to brand it some how.</p><p>Designed to be used with 2 component high temp silicone in the same way CNC kitchen does it.<br><a href="https://www.thingiverse.com/thing:3742037">https://www.thingiverse.com/thing:3742037</a><br>I do recommend placing it on the front and back side for a few seconds right after casting, so some silicone can get the holes next to the nozzle.</p><p>I recommend making a cut on both sides in the sock.<br>Best cut location is in the thin part from the thermistor to the heatbreak area, this way the sock will still go firmly all around the heaterblock and thermistor part.</p><p>I made a specific mold bottom to work with the stealthburner, see the second and third picture. I removed some material to the hotendsock doesn't upstruct the fan duct.<br>It goed very well with this model:<br>https://www.printables.com/model/278870-voron-stealthburner-slice-engineering-mosquito</p><p>Printing it in SLA will give an even nicer result after molding!</p><p><a href="https://www.thingiverse.com/make:1055912">https://www.thingiverse.com/make:1055912</a></p><p>&nbsp;</p><p>(They are almost all interchangeable.</p><p>"Mold bottom with larger flange and tighter nozzle fit" needs the "Mold core with larger flange and tighter nozzle fit" to work.</p><p>"Mold bottom with small flange" can take the standard "Mold core" and any mold top.</p><p>I recommend using the "Mold top with thighter fit")</p>