Mofessor side by side oil tank

prusaprinters

<p>Bought a Berotec Mofessor [1] with an 160 ml oil tank for my bike. The tank was too long, I couldn't figure out a subtle mounting place and I didn't want the smaller tank . So I cut of the caps, split it into two tanks, designed and printed this sockets. Now it fits right unter the seat.</p><ul><li>Filament: eSun PTEG (black)</li><li>Layer height: 0.02 mm</li><li>Nozzle size: 0.4 mm</li></ul><p>Print is very easy with only 5 mm bridges.</p><p>After printing you need to tap in a M5 thread into the hole on the bottom for the breather and hydraulic coupling. Make sure the breather and coupling are on opposite sites of the tank.</p><p>I suggest to seal the tank and socket with high temperature silicone.</p><p>If someone needs an even larger tank, for really long distances, you can just mount two 160 ml tanks side by side.</p><p>&nbsp;</p><ol><li>Make sure the breather and coupling are on opposite sites on the tank</li></ol>