Modular Wire Basket Box

thingiverse

This is a modular box for wire baskets. I made this because we have very limited space at home and had to compress all of our newborns clothes into three wire baskets in a wardrobe. The annoying thing with that was that his tiny socks kept falling through the holes and wouldn't stay in the basket. So I made this little modular box to prevent that from happening, and I also noticed that the parts with walls were good for like making small sections in the basket for different types of clothes. And since different manufacturers make different types of wire baskets, I took it upon myself to try to make this customizable. So please be gentle if you find any errors as this is my first project using openSCAD =) Here's how you should measure to enter the values correctly (in mm). * First with a caliper, measure the diameter of the wires and enter that is Wire Thickness * Then measure the width between two wires running along the depth of the wardrobe (from the door-end to the backside) and make sure to measure the OUTER distance INCLUDING the wires themselves and enter the value in Y-spacing. * Then do the same but with the wires going from side to side and enter that value in X-spacing. * Then enter your preferred wall height in Wall Height. My settings were Wire thickness: 2.5mm Y-spacing: 46mm X-spacing: 46mm Wall Height: 50mm