Modular Stackable Spool Rack

prusaprinters

First I just needed something simple so I made my first iteration:https://www.printables.com/model/568089-modular-spool-rack-with-pvcNow I have more spools and I needed more storage, so here is iteration 2!This iteration still uses 32mm PVC pipes with 3mm thickness from my local hardware store.The holes in were these pipes go have a chamfer so they get squeezed in.How this works:This iteration consists of 2 different models with 2 variation.Top and Bottom, Top is for your top most layer, bottom for any other layers.with_bottom, these include holes at the bottom to stack layers on top of eachother._support: these are for when you want a longer rack but don't have long or strong enough pipes.For a basic rack with 1 layer:2x TopFor a basic rack with 2 layers:2x Top_with_bottom2x BottomFor a basic rack with 3 layers:2x Top_with_bottom2x Bottom_with_bottom2x Bottom You can always use the models with_bottom if you are not sure if you want to expand later! They don't sit in the way of anything.