Modular Miniature Vise Adapted for Imperial Bolts and Nuts

prusaprinters

<p>I loved HD_Creator's vise but I found 6mm bolts and nuts very hard to find in the USA. I revised it slightly to allow the use of common 1/4in-20 hardware which is available everywhere here. I used TinkerCad to enlarge the hex shape in the knob to fit the bolt head and enlarged the slot in the moving block to fit the slightly larger nut.</p> <p>He also uploaded a clamp to attach to the vise to clamp it to a tabletop. I enlarged the slot for the nut in the clamp to use a 1/4-20 nut. His original design requires the vise to be screwed to the table clamp. I used TinkerCad to combine the two parts into one that does not require screws.</p> <p>Here is the link to his table clamp where you can find the rest of the parts:</p> <p><a href="https://www.prusaprinters.org/prints/50360">https://www.prusaprinters.org/prints/50360</a></p> <p>I want to thank HD_Creator for his excellent work.</p> <h3>Print instructions</h3><p>I printed with PLA at 100% infill. Follow HD Creator's instructions.</p>