Modular Hydroponic System - Remix/Collection

prusaprinters

Please reference original creators and myself if sharing/remixing.Credit to Alex Rodriguez for the original design of this system : Modular Hydroponic SystemCredit to Marc Giovannoni for the : Hydroponic 13mm DiffuserCredit to Andy Kutruff for the : Hydroton base My system uses the following component :Ikea FÖRENLIG 24 cm : https://www.ikea.com/fr/fr/p/foerenlig-cache-pot-interieur-exterieur-blanc-40454819/#contentARTDER pump : https://www.amazon.de/gp/product/B097N7Z8K2?psc=112/16 mm hose : https://www.amazon.de/gp/product/B075P5FSKG?psc=12 inch cup : https://www.amazon.de/gp/product/B07PZ7RYJB?psc=1 Hose is meant to be routed throught the center of the tower.Almost everything can be printed with no or minimal infill (I do recommand 10-20%) and thick layer size (I have a mix of 0.2 and 0.28 mm for most). Check list below for exception.You will need to print :1* vaselid_v4.stl (print 100% filling)1* Hydroton_bottom.stl (optional, meant to increase humidity by filling it with expended clay pebbles)X* Module.stl (as man as your pump/hose cand handle)1* DripReservoir.stl1* Inlet.stl (needs at least 0.2mm layer thickness, if possible go lower for the threads)1* Diffuser_no_ring.stl (same as abow)1* ModuleLid.stl Check smysnk profile for an alternative. Happy gardening !