Modular HTC Vive Tracker Mount Set

thingiverse

Modular Vive Tracker Mounts I got tired of constantly putting my feet in one place to recharge an area, or fiddling around with screws to get the trackers off. So instead I made a mount system that lets me take the trackers off the shoes while still connected to the mount. This makes it easier at the end of the day just to snap and slide the Mounts off and put them to charge. This is probably even more handy for those who have many trackers they can use with their systems. The only downside is the tolerances, I was having a bit of a struggle getting those right, and they currently work for my printer, but may need adjustment for others. That's why this is still a Work in Progress. Use at your own risk. ## Included - TrackerMount.stl: Allows connection of the Tracker to the Mount. You may need as many as you have trackers to mount. Note Must be printed at 0.2mm. - TrackerMount.step: Original step file for making the mount, you can use this to extend this system for your own mount designs. - TrackerHolderBelt.stl: Belt Mount, Allows for 38mm wide or smaller belts to be used with the Mount. Slide the Mount into it to have a connection - TrackerHolderShoe.stl: Shoe Mount. has 8 holes. Tied with the Shoelaces and allows the tracker to slide on and off it. # Notice: When I created these six months ago, I was still new to Fusion 360. You may need to rotate all by 90 degrees on the X when importing to a slicer. See Orientation Image ## Screws I use generic 1/4 camera screws. There is room for less than 18mm diameter screw heads with a height of 5mm (the holders take this into account too, so the screw might poke out of the Mount). There should be fairly large tolerance for screws, but versions for larger screws are also possible. ## Shoes As of now, the shoe unit is kinda long. I'll probably revisit this to make it shorter. You should mount it as close to the bottom of the laces as possible. I might also revisit the direction the trackers are placed.