Modular FR632 VRX Tripod Ground Station

thingiverse

I crafted this modular FR632 Tripod mount for my ground station, requiring no supports and no tools or other screws to assemble. Every component can be printed in PETG or PLA (with higher infill or thicker walls) except the FR632OrganizerCase.stl, which must be printed in TPU because it stretches over the FR632 and features flexible compartments to organize wires. Assembly Video: https://youtu.be/kauQAPGGCMM Update #5 4/26/17: The goggle holder has been enlarged to accommodate Fatsharks and other goggles hung face down, rather than from the strap. Update #4 4/1/17: This design is now more symmetrical, featuring a hexagon hole instead of a half circle so the top piece can be reversed. A new hole has been added to the bottom of the FR632 case for additional inputs and reduced plastic use. The front opening has been enlarged for less plastic consumption. The goggle and battery mounts have also been made thicker after stress testing. I've uploaded the Universal Screen mount V1.0, which only requires a rubber band to slide back and forth, holding most screens in place. However, I've realized that thicker screens don't fit well with this design, and this issue will be addressed in a future update. Update #3 3/24/17: The goggle holder has been added! The insert and top piece have been enlarged, and made symmetrical from front to back so that the battery and goggle mounts can be reversed. Update #2 3/21/17: The Battery Holder is a success! I've uploaded the file, and my next priority will be creating a goggle holder. Update #1 3/21/17: The insert and top have been made thicker to alleviate concerns about their thinness. The battery mount is nearly complete, with a test print currently underway. Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: No Resolution: .6mm Infill: 15% Notes: Printed with a 0.8mm nozzle at 0.6mm height, using two perimeters and 15% infill. The RX case is printed in TPU, while everything else is made from PETG.