Modular External Hard Drive Rack - Fits 2TB / 4TB Seagate & WD

thingiverse

Modular external hard drive stacking system with dimensions that fit popular 2TB/4TB portable drives. I can confirm that the large tray fits a 4TB Seagate Backup Plus and the small tray fits a 2TB Seagate Backup Plus Slim or a 2TB WD Easystore (be sure to check your drive dimensions against the part dimensions below). I added holes to the base of each tray to save material and allow for the addition of a fan tray in the future (in case drives get too hot in this enclosure). For me the holes added about an hour printing time and some complexity, so make sure your printer is well calibrated (or just use the versions without holes and make your own before/after printing. Depending on your printer settings, the tabs on the top of each tray may be a tight fit. Gently file/sand them (and the corresponding holes) and the pieces will fit together snugly. Update 9/2/23: I added V2 files with very slightly enlarged holes relative to the tab size. Hopefully this fits a bit better. - **Exterior Dimensions:** - **Top**: 125mm L x 93mm W x 10mm H - **Bottom**: 125mm L x 93mm W x 5mm H - **Large Tray**: 125mm L x 93mm W x 30mm H - **Small Tray**: 125mm L x 93mm W x 19mm H - **Tray Interior Dimensions:** - **Large Tray**: 120mm L x 83mm W x 25mm H - **Small Tray**: 115mm L x 83mm W x 14mm H inspired by errin's design [here](https://www.thingiverse.com/thing:3735262).