Modular component storage

prusaprinters

<p>This is a small modular cabinet with side rails and top/bottom indentations/extrusions for interlocking and stacking multiple cabinets together :)</p> <p>The cabinet module is roughly 100x45x120mm (WxHxD) not counting the side rail (1.5mm) and bottom feet (1mm).<br/> It features 2 horizontal slots for drawers.</p> <p>There are 4 available drawer sizes to choose from with several variations of internal compartments each (1-4). The number of internal compartments for each drawer is indicated by the _Yxh suffix where Y is the number of available compartments. Each separator is 1mm thick so you can do the math how much space gets lost ;)</p> <p>Internal drawer width:<br/> big - ~93mm<br/> normal - ~45mm<br/> small - ~ 21mm<br/> tiny - ~ 9mm</p> <p>All of the above have a usable depth of ~116 mm (not counting separators) and height of ~17mm.</p> <p>In each cabinet slot you can fit:<br/> 1x big OR 2x normal OR 4x small OR 8x tiny</p> <p>Or... you can also mix and match them however you like :)</p> <h3>Print instructions</h3><p>Rafts: No<br/> Supports: No<br/> Resolution: 0.2mm<br/> Infill: 10%</p> <p>Infill density in the PETG gcode files has been tuned for minimal retractions during printing.</p> <p>Make sure to keep that in mind as some infill settings may result in quality loss if your retraction settings are not perfectly set.</p>