Modular Bathtub Tray/Organizer

thingiverse

This is a versatile, user-friendly and infinitely adaptable organizer for your bathtub corner that can accommodate all the shampoos, soap, gels and essentials for an entire family within easy reach. It's also very printer-friendly with no overhangs and moderate printing time. **Print Instructions** ------------------------- - Print "Tray.stl" for each lower tray - Print as many "Joint.stl" as necessary to connect all the trays, one joint for two trays - Print "TOP_Tray.stl" for the top tray when using suction cups - Print "TOP.stl" for the endcap at the top *Important: print the parts aligned as shown in the slic3r screenshots. See "Print Settings" for how to configure your slicer software.* **Assembly** ------------------------- *Note: print with 0.2mm layer height to ensure the parts fit together seamlessly with minimal force needed. Once connected, they won't come apart without additional force applied.* - Insert one "Joint.stl" into the top of the lowest "Tray.stl" - Push the bottom of one "Tray.stl" onto the joint - If it is the topmost tray and you want to use suction cups, use "TOP_Tray.stl" - Optional: attach some silicon feet to the bottom of the lowest tray to allow water to flow out underneath - Optional: slide two suction cups into the slots of the "TOP_tray.stl" as seen in the pictures. The slots are 9mm wide - Attach the endcap "TOP.stl" to the top tray