Modular Baseball cap rack

prusaprinters

<p>I made this simple collection of interlocking parts to make a customizable length rack for organizing baseball caps, but could be used for other light weight items that fit on the hooks such as ties, belts, etc.</p> <p>For standard baseball caps you will need the following.</p> <p>One Type A, this has a screw hole for mounting it to a surface.<br/> For each hat you need One Type B (the one with a garment hook) and One Type C (the blank extender).</p> <p>Assembly</p> <p>Insert the peg into the hole at a 90 degree angle first, then slide the peg down and rotate the pieces to be in line with each other.</p> <p>For best results position the Type C part so that the peg facing the opposite direction. (peg should not be visible on the blank version when looking at the type A or Type B plates.)</p> <h3>Print instructions</h3><p>Resolution: 0.20mm speed or quality<br/> Material: PLA/PET-G<br/> Filament Profile: Prusament PLA<br/> Filament Brand: Spool 3D Black<br/> Detect Thin Walls: Disabled<br/> Extra Perimeters: Disabled<br/> Printer: Prusa MK3S, Ender 5+<br/> Supports: Not required, but will improve end result print quality of the peg and hooks.</p>