Modified Splitter Design for Ventilator

prusaprinters

<p>This splitter design is the modified version of "3D Printed Circuit Splitter and Flow Restriction Devices for Multiple Patient Lung Ventilation" by "Alexander Clarke".<br/> In the original design, corner and sharp edge is present which in practice reduces the flow of fluid.<br/> In this design I have tried to reduce the sharp edges are printed on same dimensions . This modified design is not yet tested on actual ventilator but in theory if shows some improvements.<br/> Currently I have been working on different bifurcation angles i.e. 22, 45 and 60 degrees. The optimal angle can be found through experimental procedure.<br/> Here 2 files are attached with 22 and 45 angle bifurcation.<br/> None of this design is tested on patient.<br/> Designers are appreciated to test these designs and modify for further improvements.<br/> Thanks to Dr. Alexander Clarke , here is the link for the original file.<br/> <a href="https://www.prusaprinters.org/prints/25808-3d-printed-circuit-splitter-and-flow-restriction-d">https://www.prusaprinters.org/prints/25808-3d-printed-circuit-splitter-and-flow-restriction-d</a></p> <p>Email: hassanyousuf902@gmail.com<br/> Twitter: @heisenenergy</p>