Modified base for "Servo driven ball raced & geared pan/tilt"

thingiverse

Updated I've made some minor adjustments after printing and I consider this a functional beta, so let me know if you experience any issues with the design. This is an updated version of the "Servo driven ball raced & geared pan/tilt" that allows for over 360 degrees of pan movement when using a 6T sail winch servo. The design mounts on two sides of a platform, with the gear drive underneath the pan/tilt, and features a double BB race to increase overall stability. The file "Geared_pt_top.stl" contains the remaining parts from the original geared p/t to complete the assembly, but one slight change was made to reduce support needed due to issues with printer adhesion. I'm using this servo for 360 degrees of pan: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=65739 These screws were used to mount the sail servo bracket to the base plate: http://www.hobbyking.com/hobbyking/store/__57851__3x35mm_Countersunk_Screw_with_shank_10pcs_pack_AR_Warehouse_.html And these screws connect the base of the pan gimbal to the bottom raced gear: http://www.hobbyking.com/hobbyking/store/__18266__5x30mm_Countersunk_Screw_10pcs_pack_.html Big thanks go out to Lekkybits for their original design on Thingiverse: http://www.thingiverse.com/thing:898517