Modern Design Low Table Leg

prusaprinters

<p>This modern design table legs with moderate strength and be practicable use.<br>The leg were designed with heights of 100 and 200 mm. Need 3 screws for each leg.</p><p>100mm Leg require:</p><ul><li>Recommended diagonal of the top board at least 210 mm.</li><li>Need 3 screws for each leg. The holes have a diameter of 3.3mm, the blind hole 6.6mm.</li></ul><p>200mm Leg require:</p><ul><li>Recommended diagonal of the top board at least 420 mm.</li><li>Need 3 screws for each leg. The holes have a diameter of 5.4mm, the blind hole 10.8mm.</li></ul><p>Print Settings:</p><ul><li>Material: PLA, PETG</li><li>Layer height: 0.3mm</li><li>Supports: No</li><li>Perimeters: 2 (<i>Increase according to the required toughness.)</i></li><li>Infill: 15%<i> (Increase according to the required toughness.)</i></li></ul><p>Assembly:&nbsp;</p><ul><li>Place the table legs on the diagonal of the board.</li><li>Temporarily tightening the screws near the center of the board.</li><li>Install the screws on the outside of the board and tighten the screws on the inside as well.</li></ul>