Model Paint Storage Tray

prusaprinters

<p>The Vallejo model paint kit I bought did not come with a decent storage solution so I decided to try to make one. This was my very first 3D model from scratch and in the end I came up with 3 variations of the design I imagined.</p> <p>The first variation I made was the 2 Tier Staggered design. I started to have doubts if this was the design I really wanted to print and so I went back and came up with the 2 Tier Straight design instead. This is the model I ended up printing and currently using but I felt I could maybe do better. In the end I came up with one more variation, the 4 Tier Straight.</p> <p>Again, I only ended up printing the 2 Tier Straight design but I thought I would include the other variations in case someone was interested.</p> <p>*<strong>UPDATE 02-03-2017</strong>*</p> <p>I felt like tweaking this once again. This time I rounded off the sharp corners. I think it looks a little better...</p> <p>*<strong>UPDATE 08/11/2019</strong>*</p> <p>Now with no "PAINT" text. Enjoy!</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Monoprice Maker Select Plus</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>.2mm</p></div> <p><strong>Infill:</strong></p> <p>20%</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Using Hatchbox PLA at 195 degrees with a 60 degree bed.</p></div> How I Designed This =================== <p>Originally designed in my head then haphazardly transcribed onto a crumpled piece of scrap paper. Later using a caliper to fill in some rational measurements and finally attempting to reproduce my vision in SketchUp</p> </p></p> Category: Tool Holders & Boxes