Model M USB controller/converter mount
thingiverse
Fully reversible mod, no cutting, filing, etc required. Fits the IBM Model M 1392595 terminal keyboard and many other variants while still utilizing the stock controller board (converting protocol using Soarer's converter firmware or similar). Should fit any non-Unicomp Model M if you remove the controller board and connect directly to the matrix with some FPC connectors and run Soarer's controller firmware or similar. This mount will fit the Teensy 2.0/2.0++/3.0/etc, Arduino Pro Micro, and pretty much any ~20mm wide mini/micro USB project board. The Teensy/Arduino is simply slid into the mount and held in place with a bit of glue. The mount goes where the cable/socket originally was and is held in place with the stock mounts.
With this file you will be able to print Model M USB controller/converter mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Model M USB controller/converter mount.