Mobula8 O3 Dual Antenna Mount V3

thingiverse

You can find video of my flights on Youtube.After chopping off one of the stock antennas, I replaced my Mobula8's antennas with these antennas which seem to be working great for me. I've used these antennas for a several flights and I've been happy with them over a space of about two ball fields or more.This V3 of my dual antenna mount has a hook (one the top) and screws into the back of the frame (you'll need a slightly longer m2 bolt) so it should last longer and have reduced need for glue, although a dab of E6000 on each side is probably a reasonable precaution.Compare to V2, the antennas have a both slightly wider horizontal and higher vertical angle.I'd recommend printing with Organic Supports. Be careful when removing the supports on the bottom to not rip off the foot that inserts into the original m2 nut recess on the Mob8 frame. I used Maxwel Wire Harness Cloth Tape to hold the antennas in the groove. I love this tape!! You'll see in the photos where I've mounted my ViFly Finder Mini. This location has worked well for me for quite a few flights. I used two small zip ties to hold it in place.This print requires pretty tight tolerances, probably.Also see my model Case for Mobula8 HD O3 Air Unit FPV Drone.Feedback welcome.