Mobius Knot

prusaprinters

<p>A sculpture based on the idea of a Möbius strip, a surface with only a single side. Saw a similar design in a consignment shop and came up with something similar that i liked the ascetics of.</p><p>Simple block design is easy to assemble, print out the parts with no supports;</p><p>1x of the small I&nbsp;</p><p>1x of the Large I&nbsp;</p><p>2x of the Big L&nbsp;</p><p>3x of the small L</p><p>All parts will print on a Prusa Mk3, but not all at once.</p><p>I printed them at .2 layers at 10% infill with 3 top and perimeter layers. Since its just a static model extra infill is not necessary and &nbsp;the perimeter layers ensure good solid surfaces for the clamps without crushing.</p><p>Use the colored diagram provided below to identify the parts and align them correctly, in my assembled I worked in pairs using Super glue (CA glue), using long clamps to hold the parts together as it cured. Then continued in pars till i just had two halves to assemble together.</p><figure class="image image_resized" style="width:57.15%;"><img src="https://media.prusaprinters.org/media/prints/97642/rich_content/b195a346-a1c6-4bf1-a75b-8317f98b4984/color-coded-parts.png#%7B%22uuid%22%3A%22748d3fc6-881a-4b58-a298-f36f428f0485%22%2C%22w%22%3A1800%2C%22h%22%3A1200%7D"></figure><p>&nbsp;</p><p>Once finished a light sanding to clean up the seams, printed then sanded again, then a final coat using a Copper finish metallic paint.</p><p>Sitting on the 3 “points” as pictured its about 16in wide x &nbsp;8In tall x 13in deep&nbsp;</p>