MN90 - D90 - Front Chassis Brace

prusaprinters

MN90/99 front chassis plate upgrade. No mods to the stock chassis rails are needed. Uses only 11 grams of plastic when printed at 0.2 and 20% infill. The stock screws for mounting the body can be used. This chassis plate requires a 17g or smaller servo for steering, the servo is relocated to a better position. See my other parts for an above axle servo mount that's even better and helps remove the bump steer common with the stock setup. You'll need: 4 x M3 screws (8mm or 10mm will work). 6 x M2 screws (10mm; you'll want 8 if you want to replace the stock screws) Optional: 2 x M2 Washers (the body mounting holes a little big to allow for adjustment; washes help) 2 x M2 screws (5mm to replace the stock shock screws) 2 x M2 screws (10mm+ to replace the bumper screws) Print instructionsYou'll need supports from the build plate to support the shock stems.