MMU2 Upgrade for the (old) official Prusa LACK enclosure

myminifactory

This set of parts may prove useful if you have built the official Prusa LACK enclosure. Most parts are only necessary if you have the MMU2 installed. Each part has been designed with the idea that it can be removed at any time. It contains: 2cm taller corner pieces A 2cm taller magnetic door holder New holders for the MMU2 A bushing to guide PTFE tubes out of the enclosure A filament guide to feed the MMU from the top of the enclosure A 90° turned spool holder Useful holders/grips to mount accessories and to grip and carry the upper enclosure part For the filament guide, you will need five 11cm pieces of PTFE tube (OD 4mm). It is divided into multiple parts, but no glue or screws are required because it uses Japanese dovetail joints. You will need screws for the grips (4mm holes). Those grips are actually 6cm wide parts of the i3 frame. As a result, you can attach any accessories that you normally would attach to the printer frame (like Prusa's spool holder).