MK3S Hotend MOD for Prusa MINI

prusaprinters

<p>Adapted MK3S hotend pieces for the Prusa MINI so that you can use the MK3's hotend (E3D V6) for the Prusa MINI.</p> <p>I used the original Prusa MK3S files as found on:</p> <p><a href="https://www.prusa3d.com/downloads/others/MK3toMK3s_upgrade_stl.zip">https://www.prusa3d.com/downloads/others/MK3toMK3s_upgrade_stl.zip</a></p> <h3>Print instructions</h3><p>I am a n00b, so please be gentle, this is my first upload.</p> <p>Infill: 20%<br/> Layer: 0.20mm<br/> Fill Pattern: Grid<br/> Material: Prusament PETG<br/> No supports required</p> <p>I have included 2 files for the "fs-cover":</p> <p>If you are using Genuine Prusa parts, then use "fs cover - v4 - prusa thread".</p> <p>If you are using a DIY kit that uses a different size thread, i have included "fs cover - v4 - custom thread"</p> <p>I did not include the fan-shroud as it did not require any changes. It is the same fan-shroud used for the MK3S, which can be downloaded via Prusa's website and needs to be printed in ABS/ASA</p> <p>No GCODE changes are required once you switch to this hotend setup. I am using the default "Prusa MINI" settings from PrusaSlicer with no issues.</p> <p>Warning.... I would highly recommend going through the printers setup and first layer calibrations since you are messing with the MINDA</p>