MixG1 pulley standard M3 nut
thingiverse
Designed specifically for the Mixshop MixG1 printer, I created this for my own printer. It performs significantly better than the standard pulley and the T5 belt fits perfectly. A customized version of the design found at http://www.thingiverse.com/thing:16627 has been produced. The following parameters were used in the creation of this model: teeth = 8 retainer_ht = 1.5 pulley_b_dia = 20 pulley_b_ht = 8 m3_nut_depth = 2.7 nut_shaft_distance = 1.6 m3_dia = 3.2 m3_nut_flats = 5.7 additional_tooth_depth = 0 nut_angle = 90 m3_nut_hex = 1 idler = 0 additional_tooth_width = 0.2 no_of_nuts = 1 retainer = 0 profile = 6 pulley_t_ht = 12 motor_shaft = 5.2 idler_ht = 1.5 Follow these steps for assembly: 1. Install the pulley and ensure it is secure. 2. Connect the motor shaft to the motor.
With this file you will be able to print MixG1 pulley standard M3 nut with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on MixG1 pulley standard M3 nut.