Miuzei Raspberry Pi 4 Touch Screen Holder for Prusa i3

prusaprinters

<p>I printed this case for my Miuzei touch screen mounted on my raspberry pi 4. https://www.amazon.com/Miuzei-Raspberry-Full-Angle-Heatsinks-Raspbian/dp/B07XBVF1C9</p><p><a href="https://www.thingiverse.com/thing:4663911">https://www.thingiverse.com/thing:4663911</a></p><p>But I wanted a way to mount it to the Prusa non-permenantly and in an aesthetically pleasing manner. I designed this caddy thing to hook onto the aluminium extrusion and hold it at a nice angle for touch screen usage.</p><p>I ended up printing the lower half of the previously listed thingiverse case with just infill and no top and bottom layers to give it some air flow underneath the Pi as I was going to just drop it into my mount, but I did that in PrusaSlicer with modifiers and don't have an STL or 3mf file for that one. </p><p>I printed it with supports but with minimal infill as it's not really high load bearing. I made it so the hooks hook in at a height were the base of the model sits on the same surface as the printer with the default rubber feet.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p> </p><p><strong>Printer: </strong></p><p>I3 MK3S</p><p><strong>Rafts:</strong></p><p> </p><p>No</p><p> </p><p><strong>Supports: </strong></p><p>Yes</p><p><strong>Resolution:</strong></p><p> </p><p>0.3 +</p><p> </p><p><strong>Infill: </strong></p><p>10</p><p><br/><strong>Filament:</strong><br/><br/>Generic PLA Silver</p><p> </p><p> </p><p> </p><p> </p><p> </p><p>Category: 3D Printer Accessories</p>