Miter Slot Runner - Customizable

prusaprinters

<p>Customizable miter slot runner generator. This is useful for making custom table saw and router table jigs. Variables include length, number of holes, nut or countersink screw holes, optional t-groove.</p><p>Example print settings:</p><ul><li>Elegoo Neptune 2s</li><li>Basic/cheap PLA</li><li>200C / 60C - nozzle/bed</li><li>.28mm "Draft"</li><li>Combing OFF</li><li>Infill: 10%, grid</li></ul><p>I found for my DeWalt 7491RS, printed as above, the ideal dimensions were:</p><ul><li>slot_width = 19.25; // 19.25 Perfect; 19.2 - hair loose, 19.3 snug in a few spots</li><li>slot_height = 10.40;</li></ul><p>But it took quite a bit of trial and error to dial in and you will likely need to do several 1-segment tests on your own equipment.</p><p>Source also available on GitHub: <a href="https://github.com/noise/miter-slot-runners">https://github.com/noise/miter-slot-runners</a></p><p>Original thing was created by Thingiverse user mythran, and is licensed under cc.</p><p>Additional changes made by n01s3.</p>Category: Machine Tools