Miter Gauge Wall Holder

prusaprinters

I saw another miter gauge wall mount on Thingiverse and while that design didn't feel right for me it did make me realize that my existing wood holder needed improvement so I designed this from scratch in Fusion 360. Since I have a piece of wood screwed to my miter gauge this holder stands out from the wall enough to hold it with a small lip to prevent it from slipping off the wall. The middle bridge piece is really only there to set up the alignment/spacing while it's being screwed to the wall so it's thin to be out of the way once mounted. Print Settings Printer Brand: MakerGear Printer: MakerGear M2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 25% Notes: I used Simplify3D to slice this for printing and I used two processes so that up to the screw holes would be filled at 50% infill and above that would be 25% - possibly overkill. Supports are only needed for the lip that keeps the miter gauge from slipping off the front and are minimal. Post-Printing I used 4x 0.75" Kreg Pocket hole screws to fasten it to the plywood wall. Category: Tool Holders & Boxes