MiSTer VGA/DE-15 Support

thingiverse

***6/1/21 update: added low profile cradle, this should help clear up space around the headphone jack next to the vga port VGA connectors are heavy. MiSTer's are light. I made this support the take some of the stress off of the MiSTer's VGA connector. Its height is set to work with the acrylic case ( https://misterfpga.co.uk/product/mister-case-acrylic/ ), as well as 3.5mm high rubber feet on the bottom of the support. It clears the HDMI port, unless you got a real chonky boi plug, but blocks the micro usb and usb hub port under it. so if you are not using the acrylic case or the rubber feet under the support, it might not be a good fit, if its too low, you can shim the connector up on the cradle, or change the height of the base when you print it out - i don't recommend scaling the mast height up since that's going to make the pegs stick out of the cradle/base. BUT you can scale it down, the pegs will just be smaller, so, you know, check your self before you wreck your self.