MiSTer FPGA Top and Bottom Plate Case

prusaprinters

<p>This simple top and bottom plate for MiSTer FPGA helps protect sensitive electronics.</p> <p>The top plate has 14mm standoffs built into it to clear all 40mm x 10mm fans.<br/> The bottom plate has 4mm standoffs built into it to clear the bottom of the USB Hub (or DE10 Nano pcb if not using the hub).</p> <p>To complete assembly you will need 4 m3x 25mm screws for the top plate and 4 m3 x 8mm or longer for the bottom plate. The m3 screws included with the DE10 Nano should be long enough for the bottom.</p> <p>One other thing: the brass spacers that go between the IO board and the DE10-nano and the USB Hub may need to be changed out. Some kits include ones that have a thread part sticking out on one end which won't work since you need to be able to screw in the screws to hold the plate.</p> <p>If you don't have the ability to print this out, I offer it for sale with hardware at my shop: <a href="https://retrofrog.net/products/mister-case-top-and-bottom-plate">https://retrofrog.net/products/mister-case-top-and-bottom-plate</a></p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p> <p>.3</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>20</p></div></p> <p><strong>Notes:</strong></p> <p>Print flat side face down with no supports. I recommend using a textured built sheet for the nicest results.</p> </p></p></p> Category: Toys &amp; Games