MiSTer FPGA case with MakerSpot Micro USB OTG Hub integration

thingiverse

Look, I know we all dont want to drop 50 freaking dollars on the official MiSTer usb hub and we would all rather use a seven dollar hub off amazon, but those cheap hubs just dangle off the mister fpga like an ugly dongle. So I took the initiative and modified the universal MiSTer case to include a holder for the very popular and cheap MakerSpot OTG hub: https://www.amazon.com/MakerSpot-Accessories-Charging-Extension-Raspberry/dp/B01JL837X8 <b>This case does not support the MiSTer I/O board. I dont own one so I can't create a version for it and verify the tolerances, sorry.</b>(I think it will *technically* work, you just won't have access to the 3 buttons on the top of that board. you are welcome to remix this thing to add support for the I/O board) I have never edited someone else's .stl files before so this was a real struggle for me but in the end I created something that looks clean and feels super solid. The case comes apart easily yet the usb hub does not wiggle when you are plugging things into it. The elongated case allows the USB hub to be installed with zero strain on its cable or on the DE10-nano's micro usb port. The usb port on the rear of the device is intended to be used with a USB wifi adapter (This case blocks access to the Ethernet jack, sorry) I recommend this one: https://www.amazon.com/Edimax-Adapter-Supports-MU-MIMO-EW-7822ULC/dp/B01MY7PL10 I used this for holding the fan: https://www.thingiverse.com/thing:3184154 You can cover the two holes on the left side of the case with plugs from here: https://www.thingiverse.com/thing:2684660/files (you just need the SoG_plug and SD_plug .stl files)