MiSTer - Case Universal v1.2 - Updated

thingiverse

MiSTer - Case Universal v1.2 ***Updated*** ***Update - 21.05.2019*** Added MiSTer Case Uni v1.2 Bottom Shell_Fix1.stl - More clearance for the SD Memory Card Connector on the underside of the DE10. **Update 2018-01-05** Two new Top Shells were added, including buttons, vents of the v5.2 case and an optional fan holding cage. The cage was matched for the noctua 40x40x20 mm fan but it should work well with other fans of similar dimensions. The noctua fan fits without glue or screwing requirements. Other fans might need to be glued in place. The buttons are matched for the old 2.7 version of the I/O-Bord. Compared to the v5.2, these buttons are very much at the edge of the case. Best efforts were made to accommodate the same buttons used in the universal case for the v5.2 I/O-Board. The buttons had to move quite a bit but ultimately feel even a little nicer and "clickier" compared to the other cases. Everything should print in PLA without supports - layer height was again 0.18 mm. Some guys still using the v2.7 I/O-Bord will enjoy the new Top Shells. Feedback is welcome as always. The new parts are: MiSTer Case Uni v2 Top Shell_Buttons.stl MiSTer Case Uni v2 Top Shell_Buttons_Fan.stl **Update 2017-12-26** A new Top similar to the v5.2 of the case was added, including the new vents on the top shell. You will have to provide your own fan bracket solution for now - until something is provided. Object: *MiSTer Case Uni v1 Top Shell_New_Vents.stl* **Original Summary** The Universal Case was remixed for the MiSTer to support the I/O-Bord 2.7. Also, the distance between bottom and the pbc was increased to allow for more air flow. Only the top shell of the case remains unchanged and can be used with this version 1.2. The original screws of the DE10 Nano can now be used to fix the DE10 Nano inside the case (see pictures). If you find this difficult, try using sharp screws to prepare the holes. It works! For the MiSTer logo sign, please look at the remix section or at the original MiSTer 1.0 case. Enjoy. ------------------------------------------ https://github.com/MiSTer-devel/Main_MiSTer/wiki http://www.atari-forum.com/viewtopic.php?f=117&t=32067