Mission Torus 270 LED - Modular Camera arm and lid

thingiverse

"ATT! There might be a slight issue with the angle, where the edge of the board is not completely visible on the camera.In my experience that's not too much of a problem and the camera's detect very accurately (especially after the update to the Autodarts software) but that can be fixed by propping something between the arm and the camera housing.Unfortunately as of the time of writing, I have not revisited the drawings to fix this issue as I'm not an advanced user and very crudely made the changes in a simple software to fit my needs"This is a modified version by me, of the 'Autodarts - Plasma Arm Modular' from the Autodarts website: https://docs.autodarts.io/3d-printing/ It's modified to fit the Mission Torus 270 LED darts light from the 'Autodarts - Modular Arm'.More specifically: https://docs.autodarts.io/3d-printing/stl/plasma_arm_modular.stlThe modular arm lid from Autodarts did not have properly aligned fastening holes so I altered that as well and upload it here.This arm connects to the 'Autodarts - Modular Head 38x38':https://docs.autodarts.io/3d-printing/stl/modular_head_38x38.stlAnd the appropriate lid:https://docs.autodarts.io/3d-printing/stl/modular_head_38x38_lid.stl