MISE/M3SE Enclosure

thingiverse

Enclosure for Peter Bartlett's MISE and M3SE http://bartlettlabs.com/MISE/index.html http://bartlettlabs.com/M3SE/index.html UPDATED version 2 - 20191110 Redrawn in OpenSCAD. Source file is parametric and customizable. Re-designed many details to be much more FDM-friendly. Much easier to print successfully, and requires almost no post-print cleanup. CF reader holder tray and retainer bar are both simpler now. Original version is still available in the "orig" directory in the source. Source is maintained on github! https://github.com/bkw777/MISE-enclosure Images Gallery (current version): https://photos.app.goo.gl/1NdcbL9hprvxRTdB7 Gallery (original version): https://goo.gl/photos/jDpvjbgjePCddrG99 Video (original version): https://youtu.be/Me62yHelnyM Directions 1 - 3D print the *.stl files top_cover.stl bottom_cover.stl retainer.stl 2 - Acquire the following parts 1 - 40-pin "IDE" male-female extension cable, 4 inch length It needs to be an extension, with one male and one female connector. The direction the cable exits the connector on the male end matters. The cable should go away from the key notch in the side of the connector. No extra fold / strain relief clip on the male connector. No special requirements for the female connector. http://www.cablesonline.com/240pinidedir.html Change “Available Lengths: 4 inches FI-004” 4 flat-head #6 x 3/4" screws https://www.homedepot.com/p/Everbilt-6-32-x-3-4-in-Phillips-Flat-Head-Stainless-Steel-Machine-Screw-6-Pack-814561/204274823 (machine screws or wood screws doesn't matter) 4 small rubber feet http://www.homedepot.com/p/Everbilt-1-2-in-Self-Adhesive-Vinyl-Surface-Bumpers-16-per-Pack-49967/203661150 3 - Assembly Unplug the CF reader from the mainboard, and remove the CF cards from the reader. Remove the 4 nylon stand-offs from the screw holes on the mainbiard. Plug the male end of the IDE extension cable onto the CF reader. Lay the top cover top-down on the work surface. Lay the CF reader flat in the small tray formed into the corner of the top cover, with the lights and jumpers up. Install the CF reader retainer bar over the cf reader (refer to pictures). Orient the top cover so that the cf reader is to the right and close to you, and the small square network jack opening is to the left and away from you. Stand the mainboard up behind the 2 rear screw posts in the top cover, component-side facing you, network/vga/power side down. Attach the cable from the CF reader to the IDE connector on the mainboard. Lift the mainboard up from behind the 2 rear screw posts, tip it forward toward yourself and lay it flat atop all 4 screw posts. Place the bottom cover over the back of the mainboard, with the short risers pointing down. Install the 4 screws. Painting A very close off-the-shelf match to the RCA "Mercedes Silver" TRS-80 paint is: Dupli-Color Bumper Coating FB108 Medium Silver. http://www.amazon.com/Dupli-Color-FB108-Medium-Flexible-Coating/dp/B00296DXN4