Mirka Deros Sander Adapter for Festool Cleantec and Vacuums

prusaprinters

<h3>Introduction</h3><p>There are already a lot of adapters for Mirka Deros Sanders. But either they are for the old Deros sanders, didn't fit well, had a weak structure or I just didn't liked them. Therefore, I have created three own adapters with which vacuum cleaners can be connected directly to the Deros sanders. Mainly I focused on <strong>Festool</strong> vacuum cleaners, but also other manufacturers can be connected with these, if they have the same dimensions.</p><p>The adapter will be screwed directly onto the sander and have a really good and tight fit. All models can be printed <strong>without supports</strong>! I have printed my adapters in PETG, but also PLA or any other solid material can be used for this.</p><h3><br>Adapter Versions</h3><p><strong>34,5mm Adapter</strong></p><ul><li>The inner diameter fits all general 34mm vacuums hoses (like Kärcher)</li><li>The outer diameter perfectly fits the large Festool Ø36/32 hoses</li></ul><p><strong>36mm Adapter</strong></p><ul><li>Fits all general 36mm vacuum hoses</li><li>Perfect fit for old "Festo" connector</li><li>Also greatly fits Festool Cleantec connector, but without interlock</li></ul><p><strong>36mm Cleantec Adapter</strong></p><ul><li>Perfect fit for Festool Cleantec hoses (Ø 27/32)</li><li>Connector can be interlocked</li><li>(based on the design of PwnCNC: <a href="https://www.thingiverse.com/thing:3818625">https://www.thingiverse.com/thing:3818625</a>)</li></ul><h3><br>Print Settings</h3><p><strong>Printer: </strong>Artillery Sidewinder X1<br><strong>Rafts: </strong>Doesn't Matter<br><strong>Supports: </strong>Doesn't Matter<br><strong>Infill: </strong>100% / solid<br><strong>Filament: </strong>PETG PLA<br><strong>Notes: </strong>This models doesn't require any supports.</p>