MinionD Ender 3/Pro/V2 dual duct | 12gr | stock hardware

cults3d

Now on CULTS :) FREE to all - happy remix post your makes MinionD Ender 3 / PRO / v2 dual duct 12gr | stock hardware With the existent hardware, this dual duct mount is intended to replace the stock one, improve part cooling, air flow... Easy to print, mount and do some maintenance ;) After a lot of tries with different designs... I decided to make this one, with some improvements: uses Ender 3 / Pro /v2 stock hardware 12gr without screws increase bottom shield to avoid air flow from the main hotend fan reaching the nozzle a simple but effective cable strain relief thickening of the outside ducts walls MinionD Ender 3 dual duct air flow test:https://youtu.be/2JOf3tFQ6s4 I´ve included some cut stl´s of v2 fixed and v3 to print and check fit, before printing the actual mount. Updates and fixes based on comments and suggestions, thanks ;) 19/04/201 - v3 pressFit - with the updates & fixes from v3 - the blower fan can now be mounting without screws - step included 19/04/201 - v3 - with the updates & fixes from v2 - added some small rear exhausts vents 19/04/201 - v2 fixed & adjustable - minor model fixes - adjustable screw holes for the 4010 blower 10/04/201 - vanes version + step - v2 - added inlet guide vanes as requested - mounting screws still accessible - uploaded STEP file, happy remix :) 08/04/201 - BLTouch mount - print in PLA - easy print, no supports - offset, pls check images 07/04/201 - ABL mount - 18mm inductive sensor - printed in PLA at 0.2 / 30% infill - easy print, no supports - to set up offset, pls check images » discord: https://discord.gg/k3GvDAgNEb based on this amazing design "Mini-Me v4 lightweight Ender3 Hotend Duct..." - https://www.thingiverse.com/thing:4375296