Minimalist Carbine Buttstock (MCB)

prusaprinters

<p>(Originally Uploaded to Thingiverse Oct 23, 2020)</p> <p>A buttstock designed to be compact and lightweight; while providing a similar length of pull as the Magpul MOE® Fixed Carbine Stock. Included sling loops for 1 1/4" slings.</p> <p>A drain slot is included in the design should water enter the hollow portion of the stock. This buttstock is designed for Milspec Carbine Buffer Tubes only.</p> <p>IMPORTANT: Print in PLA+ or a stronger material.</p> <p>WARNING:</p> <p>This stock is designed for "normal" shooting usage. Any repeated high impacts on: Stones, Bricks, Dense Fucking Skulls, The Great Wall of China, and Lead Lined, Steel Reinforced, Nuclear Bunker Vault Doors, will eventually lead to structural failure of the 3D printed buttstock.</p> <p>Should this occur, print another... cuz let's be realistic; who's gonna stop you?</p> <p>Hardware:</p> <p>1x M8x8 Hex Socketed Set Screw</p> <p>Installation:</p> <p>1) Press the hollow socket of the buttstock on the end of the carbine buffer tube.</p> <p>2) After making sure the set screw hole is lined up with the end of the<br/> adjustable stock channel, thread the set screw into the stock.</p> <p>Use purple Locktite on the set screw if you're worried about the screw backing out.</p> <h3>Print instructions</h3><p>Print Settings:</p> <p>Material: PLA+<br/> Extruder: 204C<br/> Bed: 54C<br/> First Layer Print Height: .24mm<br/> Standard Layer Height: .20mm<br/> Wall Thickness: .40<br/> Wall Perimeters: 4<br/> Infill: 32%<br/> Infill Pattern: Gyroid<br/> Material Flow: 101%<br/> Support Percentage: 12% (Supports only needed for the set screw hole)</p>